2010 steering wheel/console shifter lights not working
#21
Fixed?
Did anybody got it fixed?
I replaced the blown fuse but no luck.
Also i dont know if it is the same fuse or what but the lights for the emergency and info on top dont light up, i mean are they supposed to have light too like the steering?
I replaced the blown fuse but no luck.
Also i dont know if it is the same fuse or what but the lights for the emergency and info on top dont light up, i mean are they supposed to have light too like the steering?
#23
So I'm having the same issues. No back lighting for the steering wheel, console shifter, emergency flasher, and even headlight control ****. Checked fuses, #10 blown. Replaced the fuse and no luck. The fuse is still good after several re looks. Has anybody gotten this checked out by the dealership or any mechanics or possibly found a fix??
The following users liked this post:
Brian Mcgonigal (06-29-2020)
The following users liked this post:
Brian Mcgonigal (06-29-2020)
#26
I have similar problem fuse #80 was not blown. There is no power going to it. I jumpered power (12vdc) to the fuse holder with it removed and the lights work as they should. Power is not being turned on when the lights are activated or door opened. Fuse 79 doesn't have a fuse in it and I took a slightly larger fuse 5 amp older style and twisted the posts 90 degrees and it plugs in and every thing works! Kind of a gerry rig, but works.
#28
I now have a problem with fuse 27 (I think) the fuel pump relay fuse. I have seen a kit that can be installed to use a larger fuse. It seems Ford has some issues it should've corrected through the years. I had the cam phaser issue and I changed oil to 20W40 Diesel oil and the problem stopped! I like band aids they are cheaper.
#30
I'm having the exact same problem on my 2010 Lariat, fuse #10 was blown but 80 wasn't. Replaced #10 and tried the sync reset with battery disconnected for 20 min and no luck.
Anyone figure this out or have access to a wiring diagram?
Thanks
Anyone figure this out or have access to a wiring diagram?
Thanks