2009 - 2014 Fuse 27 Melting Issue
#71
Senior Member
Got my kit today, the EL3Z was ordered. It is correct, internal paperwork references EL3T.
FYI
FYI
#73
Senior Member
#74
Member
.
#75
Let the Fun Begin
#76
Senior Member
Someone stated it was 2009-2014 all trucks but the instructions says (5.0-6.2) Can someone confirm that the Ecoboost is also included in the TSB?
I have a 2013 FX4 Eco.
Danny
I have a 2013 FX4 Eco.
Danny
#77
Senior Member
ISSUE
Some 2009-2014 F-150 vehicles may exhibit a crank no-start, stalling and/or a malfunction indictor lamp (MIL) illuminated
with diagnostic trouble codes (DTCs) P0230, P025A, P0627, U0109, P0201, P0202, P0203, P0204, P0205, P0206,
P0207 and/or P0208.
#78
Senior Member
I had the same question concerning my 2012 3.7v6. Anybody know if the 5.0 and 6.2 have a different fuel pump than the 6s, maybe draws more current.
I checked my fuse 27, looked clean as a whistle, or at least for now.
Has anybody with a 6, had the melting/scorching problem ?
The following users liked this post:
GrasslandHVAC (12-17-2017)
#79
Senior Member
http://m.ford.oemdtc.com/TSB/15-0137.pdf
ISSUE
Some 2009-2014 F-150 vehicles may exhibit a crank no-start, stalling and/or a malfunction indictor lamp (MIL) illuminated
with diagnostic trouble codes (DTCs) P0230, P025A, P0627, U0109, P0201, P0202, P0203, P0204, P0205, P0206,
P0207 and/or P0208.
ISSUE
Some 2009-2014 F-150 vehicles may exhibit a crank no-start, stalling and/or a malfunction indictor lamp (MIL) illuminated
with diagnostic trouble codes (DTCs) P0230, P025A, P0627, U0109, P0201, P0202, P0203, P0204, P0205, P0206,
P0207 and/or P0208.
#80
Member