RDay

Hi I'm doing a 2" level on my 13 fx4 what size tire is most common with this?
I plan on running a good A/T tire

UFLBret

I've got 295/70/18 with no rubbing on stock 18" rims. IMO it is the perfect size on the stock rim.

rosko082391

I'm running 295/70/18 on 18x9 +20 offset on a 2 inch level and I had to trim a bit on the front valence but I have no rubbing at all

ja60524

Sharp looking truck brother!

dave91gt

295 70's.
I have an AS 2" no rub with a +20mm offset.

oubbascooba

2" level on my XLT 4x2 and I clear my 275/70's just fine with no rubbing. For a 7.5 inch wide wheel(the 18 inch FX wheel), make sure to look at the tire manufacturer's recommended fitment. stretching beyond 275 on a 7.5 on some tires causes pinch and middle tread wear if the tire is too wide. Some tire shops may also not seat the tires if this holds true. Mom and pop shops will probably do what you want though. Looks through my recent posts and you can find my truck pics.

RDay

295 70 is just over 34" right? And nitto is the only one who makes that size in an 18 isn't it?

tyees2002

iTrader: (1)

I agree. Id go 275/70's on stock wheels. They measure 33.2. Thats what im going to go with when mine wear out and get a level. Good compromise on stock rims i'd say.

2013xlt4x4

Not to get the thread too off topic, but do yall think these tires would look good with a 4 inch lift? Or would they look too small.

wadeFX4

I just put on 295/70/18 Toyo At2 today and I have a 2 inch lift. No rubbing that i can see or hear. This set up looks awesome.