13 DRL's activated today
#111
Senior Member
Well I have a 2013 FX4 and have stopped at two different dealers and have been told the truck had to be one built with Canada specs or it can't be done. And since mine was built for Texas they say it can't be done as only the trucks built for up north that may be sent to canada will have the needed relay to work!!! I hate this !!!
#112
Senior Member
Well I have a 2013 FX4 and have stopped at two different dealers and have been told the truck had to be one built with Canada specs or it can't be done. And since mine was built for Texas they say it can't be done as only the trucks built for up north that may be sent to canada will have the needed relay to work!!! I hate this !!!
The following users liked this post:
2009 KING RANCH NC (02-10-2014)
#114
Senior Member
So was it the blinkers that became drls or the headlights themselves?
#117
One Clean Machine
iTrader: (5)
#118
Senior Member
The proper sequence to program a BCM is to first download the current BCM settings (including the key fob pairing data) into the programmer, update the settings, then upload the updated data into the BCM. This method retains any existing settings, like key fob pairings.
If the first step is skipped, the programmer starts with factory default settings. Uploading new data will then clear out the key fob pairings (along with any other previous custom settings.) This will cause the interior lights to flash until at least two key fobs are paired.
So if you're getting this done, make sure the technician noes to read in the current settings first. And always take all of your keys/fobs with you so they can be reprogrammed in case there is an issue.
The following users liked this post:
stagalv (09-14-2013)