hey maybe someone knows what this means?
#1
Window Licker
Thread Starter
hey maybe someone knows what this means?
this is something I've read, might as well be in greek....?
{2013 and 2014 are the same. the dome supervision wire is positive trigger. grey/purple at the bcm. grey 12 pin plug. also a purple wire positive trigger (puddle lamp) grey 26 pin plug. pin 1.}
looking for dome wire, and this was a response on someone else but dunno what/where a bcm is ? lol
{2013 and 2014 are the same. the dome supervision wire is positive trigger. grey/purple at the bcm. grey 12 pin plug. also a purple wire positive trigger (puddle lamp) grey 26 pin plug. pin 1.}
looking for dome wire, and this was a response on someone else but dunno what/where a bcm is ? lol
#4
Senior Member
Saw your other thread look at the dimmer switch connector you want the purple wire with the grey stripe i have the diagrams i could email later tonight if you pm me an email address
#5
Window Licker
Thread Starter
#6
Window Licker
Thread Starter
ty.. I found that lil bugger on drv side sill batch, of course it was on the bottom of 200 wires, lol... but she looks good now. btw if you do buy those f-150 lighted sills, throw away the hardware kit, go to true value buy some longer better blk button head screws. also I used the expensive twist connectors tie ins off amazon.
#7
Window Licker
Thread Starter
The following users liked this post:
Marc Leos (02-16-2017)
Trending Topics
#8
Window Licker
Thread Starter
this is something I've read, might as well be in greek....?
{2013 and 2014 are the same. the dome supervision wire is positive trigger. grey/purple at the bcm. grey 12 pin plug. also a purple wire positive trigger (puddle lamp) grey 26 pin plug. pin 1.}
looking for dome wire, and this was a response on someone else but dunno what/where a bcm is ? lol
{2013 and 2014 are the same. the dome supervision wire is positive trigger. grey/purple at the bcm. grey 12 pin plug. also a purple wire positive trigger (puddle lamp) grey 26 pin plug. pin 1.}
looking for dome wire, and this was a response on someone else but dunno what/where a bcm is ? lol
The following users liked this post:
Marc Leos (02-16-2017)
#9
I don't know why, but to me it looks out of place right there.
I have seen door sills before and they are usually blended in and flows with the vehicle.
Just my opinion. To each their own.
I have seen door sills before and they are usually blended in and flows with the vehicle.
Just my opinion. To each their own.
Last edited by Baja Kits; 02-16-2017 at 10:52 AM.
#10
Window Licker
Thread Starter
I respect that and no harm, In the pics it does look at lil different, but when you're looking at it with your eyes it's not as bad tho, my opinion.. if done by instructions {verbal via americanmuscle.com} it was awful. it calls for installing over the top of existing sills, which makes it sandwich thick and those lighted sills are thick within themselves as is. removing existing sills they fit almost perfectly in between, I just notched for the cord end, so to sit flush.I wished they were a tad less wide. but hey at night when you open them doors, it looks damn good.