Topic Sponsor
Off-Road Section All discussion and questions about off-road in this Section
Sponsored by:
Sponsored by: Halo Lifts

Recovery rope, winch line and straps

Thread Tools
 
Search this Thread
 
Old 04-17-2018, 10:19 AM
  #81  
Senior Member
Thread Starter
 
marknissan's Avatar
 
Join Date: Apr 2013
Location: United States
Posts: 336
Likes: 0
Received 31 Likes on 26 Posts

Default

Originally Posted by Robmcmichael
I agree with Steve. I would buy anything made in the USA even if it does cost a little bit more.

Also, i recently took my new ropes out on the trail and......

I did some light offroading the other day and kinda on purpose got my truck stuck. I used my HMMWV as the pull vehicle, since it is a monster in the mud, and I think I got the truck deeper than I thought because it took my some pulls forward and backwards. I had to do some very heavy duty pulling with all 4 wheels spinning on my HMMWV, but on the last pull I threw my jacket on the rope (makeshift weight) and pulled the truck for all it was worth. After figuring that I would probably snap your rope before I got the truck free; I eventually overcame the mud and started to walking it out. The rope held up very well and would probably recommend this to friends. I did not have to capability of getting video or pictures because my phone was at home. Sorry. The only improvement would have been, like noted before, would be the eyelet size.

I know it kinda sounds weird, but I just copied and pasted the review I gave Mark. I really like these ropes. Only one drawback, but other than that they where awesome......
I appreciate the review! The new lines are being made 2" bigger eye to a 6" eye with a new style lock stitch as well. I will offer the eyes in full dip if everyone would prefer that over a half dipped eye.
Old 04-17-2018, 11:18 AM
  #82  
Member

 
Steve83's Avatar
 
Join Date: Jan 2018
Location: Memphis, TN, Earth, Milky Way
Posts: 11,256
Received 1,731 Likes on 1,487 Posts
Default

Originally Posted by Robmcmichael
...I threw my jacket on the rope (makeshift weight)...
I highly recommend:


(phone app link)
Old 04-25-2018, 12:38 PM
  #83  
BAMF Club
 
ak_cowboy's Avatar
 
Join Date: Aug 2007
Location: Palmer, Ak
Posts: 5,153
Received 103 Likes on 94 Posts

Default

Got the rope last week. Quality feels good, and is lighter than I was expecting. I'm using D-Ring shackles and the eyelet size is fine for me. I would prefer the whole eyelet dipped to provide a little more protection. The only other thing I found is I measured the rope at 26 feet long, not 30. I imagine the rope length was 30 before the eyelets were made. It's not a big deal to me, but you may receive some blowback from future customers if they are expecting a finished rope that is 30 feet long.

Here is a quick video of pulling our truck out. Mud is about 8" deep and the truck is in 2wd the whole time.


Old 04-25-2018, 03:10 PM
  #84  
Senior Member
Thread Starter
 
marknissan's Avatar
 
Join Date: Apr 2013
Location: United States
Posts: 336
Likes: 0
Received 31 Likes on 26 Posts

Default

Originally Posted by ak_cowboy
Got the rope last week. Quality feels good, and is lighter than I was expecting. I'm using D-Ring shackles and the eyelet size is fine for me. I would prefer the whole eyelet dipped to provide a little more protection. The only other thing I found is I measured the rope at 26 feet long, not 30. I imagine the rope length was 30 before the eyelets were made. It's not a big deal to me, but you may receive some blowback from future customers if they are expecting a finished rope that is 30 feet long.

Here is a quick video of pulling our truck out. Mud is about 8" deep and the truck is in 2wd the whole time.


https://youtu.be/NnGNc2dRIqY
I appreciate the review. I will be sure to discuss the rope length with my splicing guy to correct any new ropes to make sure they measure 30’ exact from eye to eye. I have the new lines with bigger eyes and different stitch also and the eye dip for full dip will be optional.

Last edited by marknissan; 04-25-2018 at 10:27 PM.
Old 05-07-2018, 11:14 AM
  #85  
Senior Member
Thread Starter
 
marknissan's Avatar
 
Join Date: Apr 2013
Location: United States
Posts: 336
Likes: 0
Received 31 Likes on 26 Posts

Default



Ok here is the updated corrections on the rope. Bigger eye and did a better stitch as well. Waiting on dip and will have next set of ropes and full website going.
Old 10-15-2018, 03:27 PM
  #86  
Member
 
Slammed68's Avatar
 
Join Date: Mar 2016
Posts: 45
Received 7 Likes on 7 Posts

Default

Any update on this....did you ever get a website going?
Old 10-16-2018, 08:14 AM
  #87  
Senior Member
Thread Starter
 
marknissan's Avatar
 
Join Date: Apr 2013
Location: United States
Posts: 336
Likes: 0
Received 31 Likes on 26 Posts

Default

Originally Posted by Slammed68
Any update on this....did you ever get a website going?
the kinetic lines are all finished and packaged. Soft shackles were on hold, I was working directly with the factory rep on the knot styles and ideas.




Old 10-16-2018, 09:52 AM
  #88  
Senior Member
Thread Starter
 
marknissan's Avatar
 
Join Date: Apr 2013
Location: United States
Posts: 336
Likes: 0
Received 31 Likes on 26 Posts

Default

Old 10-16-2018, 11:30 AM
  #89  
Junior Member
 
ALshooter's Avatar
 
Join Date: May 2018
Posts: 8
Received 1 Like on 1 Post
Default

Sub'd for business details once established.

Interested in a kinetic rope and a few soft shackles...
Old 10-16-2018, 11:40 AM
  #90  
Member
 
Slammed68's Avatar
 
Join Date: Mar 2016
Posts: 45
Received 7 Likes on 7 Posts

Default

Looks awesome, thanks for the update. Definitely interested once they become available.



All times are GMT -4. The time now is 01:33 PM.