I recently replaced the rear leaf Springs in my 95. When all was said and done, the rear sat a lot higher than the front. Probably to do with worn out front Springs. So i went down to my local Procomp dealer. They gave me the option of stock size , 2" or 4" oversize. Being the typical guy. I went with the largest spring, 4". I was also taking into account that I run 33" by 12.5 tires. I've begun to think maybe 4"is to big for a mostly stock truck. There is a 2" spacer between the rear leaf and axle. From what I've seen on schematics, this isn't stock. But correct me if I'm wrong. So I'm asking for another guys opinion. Is 4" bigger than stock to much? I'd prefer not to mess around to much with the front end to make these work. And I also don't want to look like the idiot with the front end of his truck pointed skyward.... But i doubt that would happen. Let me know what you think. And if the 4" does need extra work (pittman) would the 2" be the same?