Topic Sponsor
Off-Road Section All discussion and questions about off-road in this Section
Sponsored by:
Sponsored by: Halo Lifts

Is my 2013 XLT leveled?

Thread Tools
 
Search this Thread
 
Old 12-10-2013, 03:36 PM
  #1  
Junior Member
Thread Starter
 
TR1CK's Avatar
 
Join Date: Dec 2013
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default Is my 2013 XLT leveled?

First time poster here, sorry if this has been covered or posted in the wrong
Place, but I've not seen anyone with this issue. I just bought a used 2013
XLT supercrew 4x4, with only 5,800 miles, and almost the entire warranty.
As I've seen others like it, none seem to sit as high In the front as mine,
I have no problem if it is in fact leveled, because it looks good, and I would
Eventually put some bigger tires on as long as it won't interfere with the warranty
On a side note, does anybody think. A lt275/65r/20 tire would fit with the factory
20" wheels
Sorry if any of this is a stupid question, new to all this. Have wanted a truck like this for almost a decade, but just now finally able to get it.
Will post pictures as soon as I figure out how
Old 12-10-2013, 04:09 PM
  #2  
Junior Member
Thread Starter
 
TR1CK's Avatar
 
Join Date: Dec 2013
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by TR1CK
First time poster here, sorry if this has been covered or posted in the wrong
Place, but I've not seen anyone with this issue. I just bought a used 2013
XLT supercrew 4x4, with only 5,800 miles, and almost the entire warranty.
As I've seen others like it, none seem to sit as high In the front as mine,
I have no problem if it is in fact leveled, because it looks good, and I would
Eventually put some bigger tires on as long as it won't interfere with the warranty
On a side note, does anybody think. A lt275/65r/20 tire would fit with the factory
20" wheels
Sorry if any of this is a stupid question, new to all this. Have wanted a truck like this for almost a decade, but just now finally able to get it.
Will post pictures as soon as I figure out how
Here are the pictures, I think
Attached Thumbnails Is my 2013 XLT leveled?-image.jpg  
Old 12-10-2013, 04:17 PM
  #3  
Member
 
TOWGUNNER's Avatar
 
Join Date: Nov 2012
Location: Portland Tx
Posts: 85
Received 7 Likes on 5 Posts
Default

yes it has some leveling kit it might be a 2.5 inch lift up front.
Old 12-10-2013, 04:40 PM
  #4  
Junior Member
Thread Starter
 
TR1CK's Avatar
 
Join Date: Dec 2013
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks, I have better pictures of the springs, and wheel wells but can't get them to post
Old 12-10-2013, 05:05 PM
  #5  
Senior Member
 
Down_East.14's Avatar
 
Join Date: Sep 2013
Location: Eastern NC
Posts: 220
Received 21 Likes on 17 Posts
Default

look to see if it has factory shocks, or a plate spacer on top of the spring in front.
Old 12-10-2013, 06:20 PM
  #6  
Junior Member
Thread Starter
 
TR1CK's Avatar
 
Join Date: Dec 2013
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

Here's another
Attached Thumbnails Is my 2013 XLT leveled?-image.jpg  
Old 12-10-2013, 06:26 PM
  #7  
Junior Member
Thread Starter
 
TR1CK's Avatar
 
Join Date: Dec 2013
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

And another...
Attached Thumbnails Is my 2013 XLT leveled?-image.jpg  
Old 12-10-2013, 06:30 PM
  #8  
Junior Member
Thread Starter
 
TR1CK's Avatar
 
Join Date: Dec 2013
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

From the ground to the highest point of the cut out in the fender is 40" on front, and 40.5" on back
Old 12-11-2013, 09:14 AM
  #9  
Member
 
TOWGUNNER's Avatar
 
Join Date: Nov 2012
Location: Portland Tx
Posts: 85
Received 7 Likes on 5 Posts
Default

Looks like a rough country kit that u have installed
Old 12-11-2013, 02:44 PM
  #10  
for fastening fabric
 
safetypin's Avatar
 
Join Date: Aug 2011
Location: san joaquin valley
Posts: 934
Received 152 Likes on 117 Posts

Default

definitely leveled, and looks like stock shocks, so you have a spacer


Quick Reply: Is my 2013 XLT leveled?



All times are GMT -4. The time now is 10:22 PM.