cooldude960

Gents I need your thoughts/assistance.


Recently lifted my 2012 FX2 by using Brtehels 4" spindle, king coilovers and camburg uppers on 37 BFG km2s. The install went very smoothly yesterday and the truck drove without issue. However, today when I started driving to work my dash lights lit up like a xmas tree. Currently has the ABS, Parking Brake and AdvanceTrac lights on.


Any thoughts or suggestions on what may be the issue. I have all new TPMS sensors in all my wheels however I don't think that is the cause for any of the lights. The ABS line to the spindle was very tight to get on however it does fit so I don't think that is the issue.


I do have a 5 star tune on the truck set for 35" tires. My new BFGs measure out to exactly 36" so not much difference, I don't think that is the problem.


Any help or advise would be greatly appreciated.

f150 triton

The advance trac sign is a given because the whole truck is at different angles and such, not sure how to help on that one. The abs is on probably because of the advance trac. The Parking Brake is on cause it has the line too tight engaging the brake at all times probably very minorly so.

cooldude960

Thanks for the advice.


Any other thoughts from lifted guys? Anyone with these issues?

GotHonks?

No guarantee , but when mine had the same issue one of the abs sensors in the rear axel was covered in rust .... Took off the rust and problem solved ... No codes showed on mine so it took them a week to figure it out ....good luck

cooldude960

Thanks for the help guys. Was a pinched ABS line running to one of my spindles.


All good now.