Bajakits - We have what you need!
#1
Bajakits - We have what you need!
It has been a little over 6 months now since we were on the forum but now we are back and I will be handling the F150forum full time so if you have any questions, please PM, email or call me directly!! I still have my personal account here that you have probably seen - jaytizzle77 - I have a 2007 F150 with the Brenthel Mid Travel kit.
Here is a run down on what we have available for the F150...
Bajakits Boxed Upper Arm - 04-15 F150 2WD and 4WD
As always we started out with the CAD directly from Ford and dropped them into our CAD program to end up with a upper control arm that could achieve the most angle, clearance and strength by replaced the factory balljoint with the same uniballs we use on our trophy trucks (a 1″ 4130 uniball) for the utmost in strength and articulation throughout the travel. Works on both 2WD and 4WD Trucks. Direct Bolt On.
Bajakits 4" Lift Spindle - 09-15 F150 2WD
The Baja Kits fabricated upright is properly engineered to lift the front end without creating these negative effects. It works seamlessly with your factory steering and suspension settings while providing a substantial increase in strength and durability. Enhance your F-150 and provide the clearance necessary for 35 inch tires without giving up the comfort and handling of your factory Ford suspension. Direct Bolt on.
Bajakits Prerunner/Mid Travel Kit - 04-15 F150 2WD and 4WD
Are you looking to upgrade from a F150 to a Raptor without buying an entirely new truck? With this kit, your stock F150 suspension is upgraded to achieve the same offroad capabilities the Raptor has. This Kit was designed entirely with 3D CAD to ensure proper geometry and fitment were achieved. This kit uses our boxed Upper Control arm with 1 inch uniballs to provide more travel and strength compared to the stock UCA. The Lower Control Arm uses a 1.5 inch uniball and our custom tapered misaligns to connect to the upright. This kit includes everything you need to give your daily driver that extra offroad ability that you are looking for. All frame pivots use trophy truck grade bushings and hardware. Direct Bolt on.
Bajakits Race/Long Travel Kit - 04-15 F150 2WD and 4WD
Ready to make your F150 into the closest you can get to a street legal trophy truck suspension, then this is the kit for you. This is the first step into making your F150 into a true prerunner to go down to Baja and prerun the Baja 1000. As alway the kit was 100% CAD designed for only the abosolute best in all geometry and tolerances making the most travel and best fitment possible. Mild Cutting and Welding.
We also carry King Shocks, Method Race Wheels, Falken Tires, Rigid Lights and FiberwerX Fiberglass!!
We will match or beat anyone's prices!!
Please PM, Call me or email me. I receive my emails to my personal cell phone!
Thanks again!
JT
Here is a run down on what we have available for the F150...
Bajakits Boxed Upper Arm - 04-15 F150 2WD and 4WD
As always we started out with the CAD directly from Ford and dropped them into our CAD program to end up with a upper control arm that could achieve the most angle, clearance and strength by replaced the factory balljoint with the same uniballs we use on our trophy trucks (a 1″ 4130 uniball) for the utmost in strength and articulation throughout the travel. Works on both 2WD and 4WD Trucks. Direct Bolt On.
Bajakits 4" Lift Spindle - 09-15 F150 2WD
The Baja Kits fabricated upright is properly engineered to lift the front end without creating these negative effects. It works seamlessly with your factory steering and suspension settings while providing a substantial increase in strength and durability. Enhance your F-150 and provide the clearance necessary for 35 inch tires without giving up the comfort and handling of your factory Ford suspension. Direct Bolt on.
Bajakits Prerunner/Mid Travel Kit - 04-15 F150 2WD and 4WD
Are you looking to upgrade from a F150 to a Raptor without buying an entirely new truck? With this kit, your stock F150 suspension is upgraded to achieve the same offroad capabilities the Raptor has. This Kit was designed entirely with 3D CAD to ensure proper geometry and fitment were achieved. This kit uses our boxed Upper Control arm with 1 inch uniballs to provide more travel and strength compared to the stock UCA. The Lower Control Arm uses a 1.5 inch uniball and our custom tapered misaligns to connect to the upright. This kit includes everything you need to give your daily driver that extra offroad ability that you are looking for. All frame pivots use trophy truck grade bushings and hardware. Direct Bolt on.
Bajakits Race/Long Travel Kit - 04-15 F150 2WD and 4WD
Ready to make your F150 into the closest you can get to a street legal trophy truck suspension, then this is the kit for you. This is the first step into making your F150 into a true prerunner to go down to Baja and prerun the Baja 1000. As alway the kit was 100% CAD designed for only the abosolute best in all geometry and tolerances making the most travel and best fitment possible. Mild Cutting and Welding.
We also carry King Shocks, Method Race Wheels, Falken Tires, Rigid Lights and FiberwerX Fiberglass!!
We will match or beat anyone's prices!!
Please PM, Call me or email me. I receive my emails to my personal cell phone!
Thanks again!
JT
Last edited by Baja Kits; 01-13-2016 at 11:28 AM.
#4
I have the mid travel kit and it lifted my truck around 3" and I have 35" tires and it fits in my garage and parking structures.
JT
#6
Trending Topics
#8
We are launching a new website hopefully in the next couple months so everything will be updated!
If anyone has any questions though, please email or call me directly!
Thanks
JT