'19 Leaf Spacers
03-09-2019, 07:53 AM
#1
'19 Leaf Spacers
Can someone please tell me the thickness of the factory spacer blocks?
During assembly on the line, are the same blocks inserted into every 4x4 regardless of tire/wheel size and/or optional packages?
And if the spacer blocks were removed (yes - this would let the rear end settle by that amount, but...) would the alignment pins still fit together?
During assembly on the line, are the same blocks inserted into every 4x4 regardless of tire/wheel size and/or optional packages?
And if the spacer blocks were removed (yes - this would let the rear end settle by that amount, but...) would the alignment pins still fit together?
Last edited by ronemca; 03-09-2019 at 07:55 AM.
03-09-2019, 09:29 AM
#2
Mark
iTrader: (1)
you don’t own a tape measure ? 4WD come with a 1 5/8” block .. just under 2”. 2019 may be different...
03-09-2019, 11:37 AM
#3
03-09-2019, 02:45 PM
#4
Mark
iTrader: (1)
Teach yourself the correct way... when you install a lift kit .. buy new leaf springs for your desired ride height.. no axle wrap or very little. most lifts come with taller blocks that can create axle warp and when you add the bars that helps. some even stack blocks...
03-10-2019, 03:51 PM
#5
<tips hat> Yes indeed. As you've seen, I have another thread running that has been making googly eyes at this thread - I suspect they'll be hooking up soon. 
I need to verify that new leafs are intended to be installed with no spacer blocks, because if so - I'm leaning ever more strongly in that direction.
I need to verify that new leafs are intended to be installed with no spacer blocks, because if so - I'm leaning ever more strongly in that direction.
Last edited by ronemca; 03-10-2019 at 03:54 PM.
03-11-2019, 05:45 AM
#6
Mark
iTrader: (1)
yes.. they are...
The following users liked this post:
ronemca (03-11-2019)
Trending Topics
03-11-2019, 10:47 AM
#8
Mark
iTrader: (1)
Welcome