Branton

Hey everyone, I have a 2010 f150 4wd with a 2 3/4 inch level. I bought 285/65r20 tires and now it's time to buy wheels. I'm looking at the fuel maverick 20x10 with -12 offset. Has anyone done this set up before? If so, pictures would be appreciated or any knowledge about how much poke there is. Thanks in advance.

duxslayer

There will be poke - my 13' with +20 offset and 295s poked out about beyond the small OEM wheel well extensions about 3/4 of an inch - you're planning on 5mm less width (10 total, but only half on each side of rim) and 32mm more offset

Branton

Thanks!

Steelhead 6.2

I currently have a -13 offset and they stick out about 2". Added lund OEM sport flares and have much less now. Back wheels are about 1/2 inch out while the fronts are still a good 1" outside the fender.

Steelhead 6.2

This is with Factory OEM flares.

KYmxracer52

Super sharp truck!! Best of both worlds.......ground clearance and HP!

mrjayd

Can you post some side pics?

Steelhead 6.2

Yup!! I have since removed the mud flaps and because of the body design of the is gen F-150, the fronts stick out slightly more!

techrep

iTrader: (1)

where did you get your 2-3/4" level kit ?