When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Black Rhino Zulu. 20x9.5 +30. Factory 275/55 20 tires. Rear blocks are removed
Hey CATaylor, found this site searching for pics of these rims on this truck lol. Are these the machined face or matte black? I can’t decide which would look better on the abyss
These are the Matte Black with Machined Face and Dark Tint. Honestly I think they are a good match for our truck color. In answer to the PM you sent. The inside clearance to the control arm is the same as the stock rims pretty much (+1mm of additional clearance) and they stick out about 1" farther. If your truck has the factory flares like mine they still sit just inside of this.
These are the Matte Black with Machined Face and Dark Tint. Honestly I think they are a good match for our truck color. In answer to the PM you sent. The inside clearance to the control arm is the same as the stock rims pretty much (+1mm of additional clearance) and they stick out about 1" farther. If your truck has the factory flares like mine they still sit just inside of this.
Put these Toyos with Fuel Kranks on my new F-150. Getting some rubbing during full turn. Had the exact same wheels and tire size (BFGs) on my 2013 with no problems. Anyone else had a rubbing problem with the Toyo open Country A/Ts??
-Leveling Kit
-Fuel Krank Wheels
-Toyo Open Country A/T 275/65/R20
Installed 275/60R20 General Grabber A/TXs today. I didn't want to go 275/65 as they jump about 7lbs per tire and I don't need the 'E' load rating and 10-ply over 8. They were about $50 cheaper per tire too. I was going to get KO2s, but these had a better tread-life warranty and a trial period as well as good ratings around the web. They ride quiet, balanced easily, and seem to handle well so far. Just need front tint and Line-X the bed
06-05-2019, 10:49 AM
