Show off your wheels & tires
#1381
Done
Finally got the set put on and am very pleased with the results. Went with the 20” Monster XD wrapped in 305/55/20 General Grabber ATx and a 2” motofab level. Feels like a brand new truck!
Before
+18 offset
The following users liked this post:
Boostr (04-21-2021)
#1382
Replaced my 2010 aluminum chewed up looking OEM wheels with this set of four Charcoal/Metallic. They are the same size as my OEM tires and wheels so the ride, sound and handling is the same. The wheels cost about $200 more than just a set of new tires.
While I like the wheels (2017 new pulls) I have only seen three or four locally and they were not on trucks with local tags.
While I like the wheels (2017 new pulls) I have only seen three or four locally and they were not on trucks with local tags.
The following 8 users liked this post by jonnyboysoul:
az_bo (08-06-2021),
Boostr (04-21-2021),
doug97gxe (03-21-2019),
i h8 hites (08-27-2019),
Mule700 (04-24-2020),
and 3 others liked this post.
#1386
#1387
#1388
#1389
Got a flat last weekend on my stock Hankook Dynapros with 47k miles on them. They still had about 5/32" tread on them, but the flat was unfixable so needed to get a new set. Decided to go with the Toyos Open Country AT2's. Hopefully I get some good life and performance on these new shoes! Stock 20" wheels, stock height.
Flat tire that couldn't be repaired on stock Hankook Dynapros
Toyo Open Country AT2 - 275/55/20
Toyo Open Country AT2 - 275/55/20
Flat tire that couldn't be repaired on stock Hankook Dynapros
Toyo Open Country AT2 - 275/55/20
Toyo Open Country AT2 - 275/55/20