Nitto Ridge Grappler 35's
#251
Would anyone anticipate major issues running 2.5" level with 20x10 -19 and 35x11.5r20 Ridge Grapplers on 2018 4x4? I know I may need to spread crash bars like OP, but that's not an issue for me. I'd also be removing the front valence.
I've also considered bilstein 6112 coilovers in front, which claim a max of 2.75" max height on 1 website and a little over 2.5" based on @jlundy 's build thread.
Going for this look https://www.customwheeloffset.com/wh...m-leveling-kit
I've also considered bilstein 6112 coilovers in front, which claim a max of 2.75" max height on 1 website and a little over 2.5" based on @jlundy 's build thread.
Going for this look https://www.customwheeloffset.com/wh...m-leveling-kit
#252
Senior Member
#253
I'm not sure the crash bars will bend that much........And the plastic trimming is corners of FWD & AFT wheel wells where tires pass them.
#254
Senior Member
Just got 285/65/20 Ridge Grapplers. 34.5” and absolutely love em. Old tires were KO2’s 275/60/20 and I’m thinking these ride better and they are 10 ply. Go figure.
Last edited by mmwest; 02-16-2019 at 10:29 PM.
#255
I also just ordered a 4 inch lift. I’m wondering where you’re getting your sizes above. A 295/65 is almost identical to the 35x11.5; it measures out to 35.12 by 11.77 for the Ridge Grappler. This is the tire I’m hoping to fit on mine with a +1 Offset. I want a true 35x12.5 for the stance but I think it’ll be too wide even though BDS says it’ll work.
#256
The following users liked this post:
mmwest (02-17-2019)
The following users liked this post:
mmwest (02-17-2019)
#260
Senior Member
What tire pressure are you guys running your grapplers at? I'm running my 285/70/18's at 36 cold but heat up to around 40-42 and my ride is pretty smooth for 10 ply's.