johmarcorp

I need some help before I make this tire and wheel purchase. I am getting mixed answers weather or not, I will have any issues with rubbing or hitting control arms, springs, wheel wells etc. by changing my stock wheels and tires to the following:

Currently have a mammoth 2.5" leveling kit already installed on my 2016 F150 truck
Tires I'm considering are: BF Goodrich All Terrain T/A KO2, Size: 325-65R18 Tires are 12.5" wide 34.6" tall, However, BF tells me the side wall width on a 9.6"rim is 13", they can not tell me what the max width is on a 9"rim, it will be something less then 13", but I'm not sure how much.
Rims I'm considering are Hallo Rims: 18"x 9" with zero offset.

My concern is will the width of these tires mounted on these wheels pose any problem at all with rubbing or hitting arms, springs, etc/. If so, what should I do? Consider different size tires? Will different wheels with some amount of offset solve any potential problems?

I would greatly appreciate advice before I spend $1800!

Thanks everyone in advance for your help

John

bobn

customoffsets.com

Do an advances search, read what was mods were done and if rubbing

tenx82

34.6x13" tire, zero offset, with a 2.5" level??? You absolutely will have some issues.

Read through the leveling kit thread. It's a sticky in the 2015+ section.