JuniorNYC

Is anyone running Fuel Renegade wheels? I have a 2013 Ecoboost Fx4 Crew cab. Its white with the white bumpers and black trim. I was really wondering how these would look and what size i could run on a stock height. looking to go with a 20 wheel not sure what width and tire size I could get away with. Im also looking into the Bushwacker extends flares. the smooth finish.

Anyone have some recommendations or possible info, i would greatly appreciate it.

duxslayer

The 20x10 (narrowest option) in that wheel with a 6x135 bolt pattern is a -19 offset, which is pretty aggressive. My guess is you're gonna run into trouble without a lift. According to http://www.rimsntires.com/specspro.jsp, you'd stick out about 3" past the stock FX4 20" rim (that's with a 285/55) which is why I think you'll hit front and back.

JuniorNYC

Damn, I think they would look good on the truck. But a 3 inch stick out is a lot. even with the extend a flares from bushwaker they would stick out past the flares about 1.25". Whats the minimum amount of lift you think i will get away with?

duxslayer

Depends on the tire you run to a great degree - but my guess is at least 3-4"

JuniorNYC

what do you think about this wheel setup?

Fuel Renegades:
Rim Width: 10
Section Width: 285
Offset: -19
Aspect Ratio: 50
Hub Bore: 106.4
Wheels are 33x12.50R20LT Nitto Mud Grappler Tires

Think a 2.5 rough country Level kit would be enough?

JuniorNYC

I can also go with a 285/50r20 Nitto Grappler that gives me a 31.2x11.2R20 Diameter

AricsFX

iTrader: (3)

31s would be to small. youre gonna rub either way

JuniorNYC

is it because of the offset that i would rub?

gprice2

Yes

JuniorNYC

I don't mind trimming plastic, just not metal. Think i will have to trim metal with this setup? If its just plastic ill pull the trigger