Another predictable Tire Question
03-23-2018, 10:42 AM
#1
Another predictable Tire Question
I have a 2017 F150 4x2 with the stock 20's. Looking to put 295/55 R20 (32.8" x 11.6"). No lift, level or anything, just want a to go a little wider and taller. According to Tirezize.com the stock 275/55 R20 is 31.9" x 10.8". I see people saying they put 275/65 R20 (33 x 10.8) or 305/20 R20 (32 x 12) on stock rims with no lifts/levels. Not really sure how a 275/60 has same width as the 275/55 (according to tiresize.com) but I digress.
I think the 295/55 R20's will work fine but I just want a little feedback. Again 4x2, no lift or level and stock rims. Thanks!
I think the 295/55 R20's will work fine but I just want a little feedback. Again 4x2, no lift or level and stock rims. Thanks!
03-31-2018, 11:56 AM
#2
Senior Member
I think 295/55/20 will be close to that upper control arm ball joint. I have 285/55/20’ ko2 on factory 20’s my fx4 is leveled and I wouldn’t go any wider. I think a agrssive looking at tire in 275 /60/20 would look good . If your in Texas I could make you a hell of a deal on a set of 285/55/20 ko2.
The following users liked this post:
Seth277 (04-13-2018)
04-13-2018, 09:26 AM
#3
Thank you. My concern with he 275/60 or 65 is that it's thinner than the 275/55. I like an equal amount of height and width. On my last F150 (1999 4x2) I had 285/75 R16 mounted on 16 x 8 rims (stock suspension) and it looked great. I will probably do like you and put on 285/55 R20 as this is a bit taller and wider. Sadly however, I am in Florida but thank you for the offer. ko2's definitely look sweet!
