Wanting to up my tire size from 33 to 35. Currently just have Bilstein adjustable struts up front (gives 2”). I’d like to keep as close to a factory ride as possible so I’m nervous about a full 6” lift. The Ready Lift 3.5” kit was recently recommended as a possibility. Anybody know if that kit will work with 35’s? My wheels are 18” XD Monsters if that helps. Offset I believe is -18.

Appreciate any advice.

It is a 2010 FX4 Crew Cab.

You say the offset is -18. That may be a tough fit. If the wheels fit flush with the fenders it’s probably a +18 offset. If this is the case you should have room. If it’s a -18 you may have to do quite a bit of trimming. Bellow is a picture of my truck with a -19 offset with 33.5x12.5’s, to give you an idea if you have a -18 offset.

Randy I will likely be putting new rims on when Ingonwith 35’s, and I don’t know the offset yet. Currently I have -18 with my 33’s. I’d like to keep it about the same with 35’s. Your pics look good. Just so I’m clear though, you are showing 33’s on a 3.5” lift, not 35’s right?

My setup is a 2in leveling kit with a 20x10 -19 hostile alpha wrapped in a 305/55r20 (33.5x12.5) General Grabber X3. I had to trim some plastic up front and do a small fender mod in the back. You may be able to clear 35’s with the extra 1.5” but you will have to trim.