Wpt1212 to kicker harness schematic?
05-26-2018, 12:40 PM
#1
Wpt1212 to kicker harness schematic?
Does anyone have a diagram of wiring the 1212 adapter to a kicker hideaway adapter? I searched all the various threads but couldn't seem to locate it. Thx so much!
05-27-2018, 06:27 AM
#3
Thx. I did see this, but I thought there was something more descriptive? I personally have this setup but didn't want to pull the plastic back off to see how I originally set it up. My friend bought an f150 and wants to do the same thing. The wires in this link reference colors, most of which don't exist on mine. All the wpt wires are green or black, this guy is referencing voilet, brown, etc etc? I remember when I set mine up, someone had a much more descriptive setup, photos even if I recall.
07-15-2018, 02:18 PM
#4
Thx. I did see this, but I thought there was something more descriptive? I personally have this setup but didn't want to pull the plastic back off to see how I originally set it up. My friend bought an f150 and wants to do the same thing. The wires in this link reference colors, most of which don't exist on mine. All the wpt wires are green or black, this guy is referencing voilet, brown, etc etc? I remember when I set mine up, someone had a much more descriptive setup, photos even if I recall.
The factory plug has the following:
Orange/red = power
Black/violet = ground
Brown = remote turn on/clip detect
Violet = speaker + Connet both positive wires have your RCA’s here
Green = speaker - Connect both negative wires of your RCA’s here
Black = speaker shielding
If you are using the 1212 harness with the wires facing toward you and the clip at the top that secures into the factory harness:
top left black wire is positive - goes to orange red on factory side
top right is a ground wire or negative - Black violet on factory side
bottom left is the remote turn on - Brown on factory side
bottom second on the left is the line level positive - Violet on factory side
bottom third right is the line level negative - Green on factory side
you don’t use any other wires.
I hope this helps.