MASTERZ

Will this work if I have the Sony system? I mean after I removed the Sony sub box assembly and replaced with JB Audio CS110LG-TW3? I would love to splice and by-pass the EB fake engine sounds.

Southpaw1227

Can't speak to that since my truck wasn't equipped with the Sony system. Anyone else?

verendus

For tapping a remote wire, are you sure you can use #38? It's a 30A circuit breaker, and short testing today melted the remote wire.

Can I tap into the 10A radio using add-a-circuit? the only thing is Ford uses Micro2, which is not readily available.

Wyo11Scab

iTrader: (1)

Thanks for bringing this to our attention. Ford changed the fuse layout in 2015.
Yes use the #33 radio fuse with an add a circuit if possible.

turbo06

But isn't 33 hot at all times?

BooSSted

I built a box for mine and it didn't allow the seat to move freely. I cut the carpet/foam out and it gave me about an inch to push the box back enough to clear the seat.

Wyo11Scab

iTrader: (1)

I don't know it is marked radio just like 38 was on the 2014

verendus

33 is radio on 2015. But, I just found out this is not the MFT radio, but radio for remote. It is hot at all times, so I need to find another fuse to tap into.

turbo06

Number 33 is always hot. It won't work even marked radio. 37 is switched.

verendus

Are you saying 37 will work for remote wire?