WJLarson

Hey guys, so I installed a new deck a couple of months ago, and now when ever I hit a bump, it turns off and completely resets and goes into demo mode. Anyone have any idea what the cause of this could be? Thanks

L150A

Check the wiring first. Maybe the Power wire is not connected well and it disconnect when you hit a bump

Wyo11Scab

iTrader: (1)

Yes check the power wires. You could also have something wrong inside the HU. Is it a reputable brand?

WJLarson

Yes it is a top of the line pioneer. And I was going to do that just thought id check first, thanks

Robert8252

Soldering will eliminate needing to worry about this. Sounds like a loose ground or power wire connection.

WJLarson

So I went to check the power wire, and I can't figure out how to get the damn thing out!

L150A

How to take out the head unit?

WJLarson

Ya the plastic dash kit that hold the deck. I'm guessing just pull but I there's not really any good place to hold

Wyo11Scab

iTrader: (1)

Probably got some hidden screws. Check Youtube

L150A

You should have special 'keys' for removing the head unit
Something like this:

If you do not have them check this:
https://www.google.com/webhp?ssrp=1#...+tools&tbm=vid