Rodney's boxes with amp + sub
#12
Here's a few amps I found perusing sonic electronix this morning. All of them will fit where you need them to and put out around 500w at 2 ohms. Good match for the sundown sub
http://www.sonicelectronix.com/item_...I-S550.1D.html
http://www.sonicelectronix.com/item_...PI-i450.1.html
This one might be the best as far as power and fitting where you need it to. Only 9 inches long
http://www.sonicelectronix.com/item_...PI-i650.1.html
http://www.sonicelectronix.com/item_...AC-5001PS.html
http://www.sonicelectronix.com/item_...GTO-501EZ.html
http://www.sonicelectronix.com/item_...I-S550.1D.html
http://www.sonicelectronix.com/item_...PI-i450.1.html
This one might be the best as far as power and fitting where you need it to. Only 9 inches long
http://www.sonicelectronix.com/item_...PI-i650.1.html
http://www.sonicelectronix.com/item_...AC-5001PS.html
http://www.sonicelectronix.com/item_...GTO-501EZ.html
Rodney's a little worried that the magnet might not clear the back of the box and he also mentioned the front hitting the carpet potentially. Seen some vids and it does look like the sub has alot of movement.
Any thoughts, other subs... Had my mind set on the sundowner crap
#14
Boost :)
I have bought a number of boxes from Rodney and they have all worked great and looked perfect. My current one I bought empty with an opening for a 12" sub and the amp rack he has built in.
I have a current year shallow mount RF P3SD2-12 sub wired to 4 Ohm since that what my single channel MB Quart amp will push. It sounds fantastic. I previously had a single 4 ohm Kicker shallow mount using the same box and amp and it was a joke by comparison.
Here is a link to the sub:
The fit is VERY VERY tight both in the opening for the mounting flange as well as the depth. He cuts a hole in the back of the box and puts the Kicker metal plate back there for magnet clearance and this sub needs all of that space.
I am able to get the MBQuart amp as well as the AudioControl Lc2i in the space he makes for the amp rack. Everything fits, no holes drilled, and sounds fantastic for a shallow mount setup.
I have a current year shallow mount RF P3SD2-12 sub wired to 4 Ohm since that what my single channel MB Quart amp will push. It sounds fantastic. I previously had a single 4 ohm Kicker shallow mount using the same box and amp and it was a joke by comparison.
Here is a link to the sub:
The fit is VERY VERY tight both in the opening for the mounting flange as well as the depth. He cuts a hole in the back of the box and puts the Kicker metal plate back there for magnet clearance and this sub needs all of that space.
I am able to get the MBQuart amp as well as the AudioControl Lc2i in the space he makes for the amp rack. Everything fits, no holes drilled, and sounds fantastic for a shallow mount setup.
#15
I have bought a number of boxes from Rodney and they have all worked great and looked perfect. My current one I bought empty with an opening for a 12" sub and the amp rack he has built in.
I have a current year shallow mount RF P3SD2-12 sub wired to 4 Ohm since that what my single channel MB Quart amp will push. It sounds fantastic. I previously had a single 4 ohm Kicker shallow mount using the same box and amp and it was a joke by comparison.
Here is a link to the sub:
http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1
The fit is VERY VERY tight both in the opening for the mounting flange as well as the depth. He cuts a hole in the back of the box and puts the Kicker metal plate back there for magnet clearance and this sub needs all of that space.
I am able to get the MBQuart amp as well as the AudioControl Lc2i in the space he makes for the amp rack. Everything fits, no holes drilled, and sounds fantastic for a shallow mount setup.
I have a current year shallow mount RF P3SD2-12 sub wired to 4 Ohm since that what my single channel MB Quart amp will push. It sounds fantastic. I previously had a single 4 ohm Kicker shallow mount using the same box and amp and it was a joke by comparison.
Here is a link to the sub:
http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1
The fit is VERY VERY tight both in the opening for the mounting flange as well as the depth. He cuts a hole in the back of the box and puts the Kicker metal plate back there for magnet clearance and this sub needs all of that space.
I am able to get the MBQuart amp as well as the AudioControl Lc2i in the space he makes for the amp rack. Everything fits, no holes drilled, and sounds fantastic for a shallow mount setup.
JBL GTO-501EZ
http://www.sonicelectronix.com/item_...GTO-501EZ.html
Emailed Rodney to see if that sub and box would work but if you had no issues I should be good to go!!!!
#17
#20