Quick crossover hookup question(JL Audio c5)
#11
Senior Member
Thread Starter
Just finishing second speaker. 7 hours
hope the backs go quicker!!!!
hope the backs go quicker!!!!
#12
Senior Member
Thread Starter
well the back doors only took about 1/2 hour each. total time on this install about 9 hours including clean up.
I found removing the door lock or whatever its called made re-attaching the door easy.
I used this to see where to re-connect the plugs while re-installing the doors. it worked.
dented.....
i installed the crossovers using velcro same spot both sides.
I found removing the door lock or whatever its called made re-attaching the door easy.
I used this to see where to re-connect the plugs while re-installing the doors. it worked.
dented.....
i installed the crossovers using velcro same spot both sides.
#13
Senior Member
Glad you got it done. Once you do it a few times it's nothing. Not to make you hate me but I've swapped all 4 doors and tweets out in about 20 minutes. Looks like you did a good job. Just make sure people don't kick the crossovers. You can zip tie the the the factory wire harness under the dash to make them disappear.
The following users liked this post:
freddyttt (05-11-2015)
#14
Senior Member
Thread Starter
Thanks Rob... I left plenty of wire to move them. the hardest and longest part was tracing then un-taping and tapping in to the wires....