Pics for install
#12
Not yet. I'm having an issue with the sub not fitting in the box. Working that out with SupercrewSound. So in the meantime I was going to do the following in this order:
Install front comps
run power wire from batt to rear seat
Mount amp and LOC on MDF
Is it absolutely necessary to cut the carpet/insulation or can I just mount the MDF on top of the carpet. Id rather not cut if I don't have to.
Install front comps
run power wire from batt to rear seat
Mount amp and LOC on MDF
Is it absolutely necessary to cut the carpet/insulation or can I just mount the MDF on top of the carpet. Id rather not cut if I don't have to.
#13
I was able mount the amps without cutting the insulation.
https://www.f150forum.com/f38/amp-in...ng-pics-60544/
https://www.f150forum.com/f38/amp-in...ng-pics-60544/
#15
i just installed an amp and subs in my truck. i'll get some pics up. the amp wire was easy there is a rubber boot on the firewall with wires coming out of it. that boot goes behind the glove box. thats where i ran mine.