New pioneer HU question
03-22-2012, 09:38 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2010
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
New pioneer HU question
So I just got the pioneer avic-x930bt to replace the stock ford single disc HU, however, I had a question over if this HU needs that added cable/resistor that others refer to that allows DVDs to play while the truck is in gear.
Can anyone confirm this?
Can anyone confirm this?
03-22-2012, 09:57 PM
#3
Junior Member
Join Date: Mar 2012
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
All you have to do is change a position of one of the pins on the pioneer head units power connector. I have done it on my 910BT and on my current z130BT. Works great. Several tutorials posted on YouTube.
03-24-2012, 02:36 AM
#6
go to your local autozone and pick up a relay, needs to have certain pins on it though. not sure but I think it's 56, 87, 58, 57, not in any perticular order. or if your lazy you can pick one up off eBay for around $5-$7 an it comes wires an covered you just need to connect it
03-24-2012, 03:16 AM
#7
Junior Member
Join Date: Sep 2011
Location: Lafayette, LA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
On the avic x930bt you have to move the yellow wire from its pin slot up one and then ground the wires out. Pretty sure relays will not work with that model. I just did one in my truck a month ago. YouTube is your friend.
