Need Audio Help!!!
#1
I ran all my wires and plugged them into the amp...but the sub still won't bump at all!
I ran the remote wire from the power wire off of the headunit. And the RCA cables are plugged into the OUT plugs on the amp, an there are only TWO RCA plugs off of the headunit (1white, 1red)
And my ground cord is run to the bolt of the rear seat leg mount into the floor of the truck
Does anyone know what I coulda done wrong? Or is my sub blown from the factory
System:
Kenwood KVT-516
Kicker 8" shallow sub (4ohm)
Kenwood KAC-7202
I ran the remote wire from the power wire off of the headunit. And the RCA cables are plugged into the OUT plugs on the amp, an there are only TWO RCA plugs off of the headunit (1white, 1red)
And my ground cord is run to the bolt of the rear seat leg mount into the floor of the truck
Does anyone know what I coulda done wrong? Or is my sub blown from the factory
System:
Kenwood KVT-516
Kicker 8" shallow sub (4ohm)
Kenwood KAC-7202
Last edited by chocolateskwlbuss; 08-14-2012 at 10:21 PM.
#3
Originally Posted by atxval
RCA's flipped? Shouldn't the RCAs from the deck be plunged into the in port to the amp.
FML haha