Maestro BU Camera Wiring
01-31-2017, 07:38 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2014
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Maestro BU Camera Wiring
I bought the Maestro Dash kit & module for a 2013 screw that has the BU camera showing in the rear view mirror.
How do I get it to show on the HU which is a JVC KWV820BT?
Do I need to splice some wires ?
How do I get it to show on the HU which is a JVC KWV820BT?
Do I need to splice some wires ?
02-02-2017, 08:43 AM
#2
Yes that's what I did. There are some wires (been a while so I don't remember the colors) running down the left kick panel from the back. I had to tap into those two. I believe I did a search and someone had posted the process, I believe it was this forum.
Also at one time someone was kind enough to give a link to the electrical diagram showing the wire colors which are year specific.
When in reverse now, both the mirror and the head unit show the rear image.
Also at one time someone was kind enough to give a link to the electrical diagram showing the wire colors which are year specific.
When in reverse now, both the mirror and the head unit show the rear image.