Topher03

Just finished my install by following Chads thread. But for some reason Im picking up static and its making the 363 stay on since its seeing a signal. Also the door chime is Crazy loud. Also I have a static/cracking noise in the tweeters and it changes pitch as u adjust the gain on that channel

Wyo11Scab

iTrader: (1)

Could be a bad ground or RCA cable. I would unplug each RCA one by one and see if you can narrow down the bad one.

Topher03

Seems to be channel 3 and 4 that run to the tweets. Also I don't like how loud the chime is when the key is on and door is open

Topher03

Amps are grounded to the boLT behind the back seat on the drivers side up by the glass.

Wyo11Scab

iTrader: (1)

I would start with those 2 RCA cables to see if that is the problem.

Topher03

I unhooked the harness in the dash so I could still listen to the radio. Will have to pull the dash again

Topher03

Also trying to find a place to hook up the remote wire. The passenger side fuse box has all those micro fuses and I cant find a circuit add on for those.

freddyttt

did you grind all the paint before screwing the ground ??

Wyo11Scab

iTrader: (1)

https://www.amazon.com/Lumision-SHIP.../dp/B00OZGA8O8

Topher03

If I unplug the high level inputs from the 363 or unplug it from the Parrot harness all the static goes away.