Double Din install kit
#1
-_-
Thread Starter
Join Date: Oct 2008
Location: Fort Worth, TX
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Double Din install kit
A couple months back I ordered and installed a Kenwood DNX5120 (great system, btw). The only problem is the double din install kit it came with more or less looks like crap. It looks like the dash is at an angle and at the top there is a significant gap (1/4" or so). I was going to just add washers or some other spacer to the top screws to push out the top of the kit, but after I had an alarm installed on my truck I noticed the bottom tabs were snapped off.
So more or less I'm at a point where I'm just going to purchase a new kit. Does anyone have any recommendations on the kit I should purchase, or are all of them about the same, and I'll just have to work some magic to get it to look "factory"?
Thanks for the help!
So more or less I'm at a point where I'm just going to purchase a new kit. Does anyone have any recommendations on the kit I should purchase, or are all of them about the same, and I'll just have to work some magic to get it to look "factory"?
Thanks for the help!
#2
Senior Member
Join Date: Oct 2008
Location: Boise, Idaho
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
#4
-_-
Thread Starter
Join Date: Oct 2008
Location: Fort Worth, TX
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Picked it up on ebay (install kit came with HU), of course
Saved myself $350 or so.... A little $10-20 item is my only complaint, so I made out alright!
Looks like crutchfield is out of the in-dash kit....................
Saved myself $350 or so.... A little $10-20 item is my only complaint, so I made out alright!
Looks like crutchfield is out of the in-dash kit....................
#7
Car Audio Junkie
Trending Topics
#8
FULL BLOODED AMERICAN!!!!
Join Date: Apr 2007
Location: Jacksonville, Florida
Posts: 5,179
Likes: 0
Received 2 Likes
on
2 Posts
True. I only mentioned CC in case BB doesn't have them.
If I were you I would check a local smaller audio shop before BB. Sometimes the little ma and pa shops will sell them to you for next to nothing.
If I were you I would check a local smaller audio shop before BB. Sometimes the little ma and pa shops will sell them to you for next to nothing.
#9
Senior Member
#10
FULL BLOODED AMERICAN!!!!
Join Date: Apr 2007
Location: Jacksonville, Florida
Posts: 5,179
Likes: 0
Received 2 Likes
on
2 Posts
^^Agreed. Crutchfield includes ALL the mounting hardware and necessary wiring that you need to hook up your new cd player. Those are 2 of the reasons why I always buy my stuff from them.