dash warning light problem with new radio
04-14-2016, 09:56 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2014
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
dash warning light problem with new radio
2010 XLT I just installed a new pioneer DEH-X4800BT radio, removing the factory touch screen gps unit...now my e brake light is on with tire pressure and trac light and have no turn signal indicators...has anyone seen this problem or is it just my screw up somewhere?
Thanks
Thanks
Last edited by berserker2010; 04-14-2016 at 09:59 PM. Reason: no year of truck
04-15-2016, 11:22 AM
#2
2010 XLT I just installed a new pioneer DEH-X4800BT radio, removing the factory touch screen gps unit...now my e brake light is on with tire pressure and trac light and have no turn signal indicators...has anyone seen this problem or is it just my screw up somewhere?
Thanks
Thanks
04-16-2016, 03:06 PM
#3
Junior Member
Thread Starter
Join Date: Jan 2014
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
04-22-2016, 08:11 PM
#4
Junior Member
Thread Starter
Join Date: Jan 2014
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
still got the lighting problem
installed the C2R-FRD1 and the tire pressure warning, e brake and trac control lights are still on....can I bypass the harness and wire direct to the speakers
2010 f 150 xlt crew cab 4 door...any help would be great, thanks
2010 f 150 xlt crew cab 4 door...any help would be great, thanks
04-23-2016, 02:51 PM
#5
You should be able to use the $5 harness. Metra 70-5520. You will need to run a turn on wire to your fuse box.
There is something causing your canbus to turn those lights on.
Use the simple harness unless you have SYNC and want to retain it then you have the correct harness.
You said you had a factory touchscreen? In an XLT? It's not a Sony system is it? I wouldn't think so.
There is something causing your canbus to turn those lights on.
Use the simple harness unless you have SYNC and want to retain it then you have the correct harness.
You said you had a factory touchscreen? In an XLT? It's not a Sony system is it? I wouldn't think so.
04-24-2016, 08:34 AM
#6
Junior Member
Thread Starter
Join Date: Jan 2014
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
You should be able to use the $5 harness. Metra 70-5520. You will need to run a turn on wire to your fuse box.
There is something causing your canbus to turn those lights on.
Use the simple harness unless you have SYNC and want to retain it then you have the correct harness.
You said you had a factory touchscreen? In an XLT? It's not a Sony system is it? I wouldn't think so.
There is something causing your canbus to turn those lights on.
Use the simple harness unless you have SYNC and want to retain it then you have the correct harness.
You said you had a factory touchscreen? In an XLT? It's not a Sony system is it? I wouldn't think so.