Badfinger10

Good day,
Can you guys please post a picture of where you mount your crossover in the door? also where did you mount the tweeter? I need Idea before I change my front speakers. Thank you so much

Wyo11Scab

iTrader: (1)

Year and model please

Badfinger10

Sorry forgot to add that info. 2016 f150 2.7 EB Lariat

hilld

Here you go

This is on a 17, front door (drivers side), reverse the location for passenger side.

Badfinger10

Thank you! Same speaker im thingking. Did the door panel fit without problem? Also where did you get that foam? Thank you!

hilld

Yes, I checked and double checked the location, the door panels fit fine, there is quite a bit of space just below the door handle area.

As far as the foam, I got it on ebay.
http://www.ebay.com/itm/FAST-Rings-6.../182646809431?

You will also need to get some adapters to fit the speakers as well as wiring pig tails unless you buy the speakers from crutchfield in which case you get that stuff included.

Front door: Metra 82-5607 6-1/2" Front Door Speaker Adapter for 15-up Ford F-150 (pair) 6.5"

Rear door: NEW METRA 82-5605 6.5" SPEAKER PLATES FORD F-150 2015-UP (if doing 6.5 JL in the rear, you will need to trim the inside of the adapters bit, they are already scored for that)

wiring pigtails:METRA 72-6502 4-WAY SPEAKER HARNESS CONNECTOR FOR SELECT VEHICLES (need to order 2 if doing 4 speakers)

Badfinger10

Thank you for all the info! so I just need to cut the end of the harness and add long speaker wires if I want to extend them? I have alpine type r coax on all 4 speakers and I want the JL components at front

hilld

No cutting of the wires is required if you use the wiring pigtails.

Badfinger10

What kind of bracket did you use? looks so clean. Is this metra?

hilld

Yes, part numbers listed in post #6.