box building
12-13-2010, 08:07 AM
#1
Member
Thread Starter
Join Date: Oct 2010
Location: Florida
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
box building
im building a box cuz the one i bought is p.o.s i can feel the air coming out and such,
http://www.supercrewsound.com/commerce/pimg.jsp?id=187
is that i want, down firing, and legs on the side ect (^same idea)
now my question is should i put a divider in the middle ???
any other tips please share! :n)
http://www.supercrewsound.com/commerce/pimg.jsp?id=187
is that i want, down firing, and legs on the side ect (^same idea)
now my question is should i put a divider in the middle ???
any other tips please share! :n)
Last edited by jdx45; 12-14-2010 at 11:03 AM.
12-14-2010, 02:21 PM
#3
Junior Member
Join Date: Dec 2010
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
If you're going with a mono amp, it's not really necessary. However, a "divider" is generally a good idea as it provides more support for the box. Constant rattling from the subwoofers will eventually loosen screws/glue/staples (as it should!). Best of luck to you
12-14-2010, 02:24 PM
#4
Junior Member
Join Date: Dec 2010
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Forgot to add that the boxes that come pre-fabricated at our shop for the F-150 do not come with the "divider" but we definitely put in that extra divider when we build them ourself (when we're out of stock on pre-fabs)
12-15-2010, 05:42 PM
#5
Member
Thread Starter
Join Date: Oct 2010
Location: Florida
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
idk if it matters but i have a crunch P1-1000.2 it is selected on mono but i think i will put it in anyways, why does it matter if its mono or not for a divider?