Audison 8.9: Where to buy
#31
Nice! You are going to love them!
On my 16, I had the Sony system so all channels were already ran to the oem amp at the rear of truck. I replaced the Sony amp/dsp with the Rockford Dsr1. It came with a plug and play harness for the oem speaker harness. No new wires were necessary. But, in your case, running new tweeter channels is simple as can be. No molex plugs to pass through. Are you going to run active? If so, even better. No passive crossovers to wire in.
On my 16, I had the Sony system so all channels were already ran to the oem amp at the rear of truck. I replaced the Sony amp/dsp with the Rockford Dsr1. It came with a plug and play harness for the oem speaker harness. No new wires were necessary. But, in your case, running new tweeter channels is simple as can be. No molex plugs to pass through. Are you going to run active? If so, even better. No passive crossovers to wire in.
#32
Originally Posted by woodall01
for now they are going to be run from the factory system, I am going to buy the Audiocontrol D6-1200 in a couple of months. The audio upgrade project is a budgeted thing, I am cash flowing it for now. BTW thanks for the information, it helps talk to someone else that's done this before.
#33
Nothing wrong with that. When you install them on the stock headunit, make sure to use the passive crossover for the tweeter. Meaning just mount the crossover in-line with the tweeter channel. Your mid bass can already handle the signal output by the headunit but the tweeter will still need the crossover. Just FYI so you don't blow your new tweeters.
#34
Check your Paypal for tracking info. Speakers were shipped today!!!
__________________
PM me for special pricing as our contracts do not allow for posting prices publicly.
Serving the forum for over 8 years
Brands we sell include: Kicker, NavTV, PAC, CARiD, Dayton, Second Skin, Audio Control, Skar Audio, JL Audio, Focal and more.PM me for special pricing as our contracts do not allow for posting prices publicly.
#35