TXjeepTJ713

Edited post, I was a little too harsh.

dbmachine

TX send the OP a private message, I'm sure he would be glad to help you instead of bashing him openly to the members here.

andthereyouare

I wanted to thank you all for this thread and this website.

I have studied these pictures (mostly from Jbarron74's setup) for weeks. And through trial and error and even cutting the tip off one of my fingers with the table saw(I don't recommend doing that). I installed a single DVC shallow MB Quart 10-inch sub with a 5 channel Rockford Fosgate amp. The seats fold up like nothing is back there. And my entire system sounds fantastic. This was the hardest build I've ever done and I used some fiberglassing in the mix too.

Head Unit: I replaced the 4.2 unit with a Sync 3
Speakers: Replaced all with Kicker KS
Sub: MB Quart M-Line 10 inch sub
Custom built fiberglassed box with .7 cu.ft.
Amp: Rockford Fosgate R600X5 (5) channel
Used (2) Kicker KISLOC digital 2-Channel - for speaker wire to RCA

ciscokid1957

Pictures???

Wyo11Scab

iTrader: (1)

of the finger

ciscokid1957

Well... Ummm.. Not my fetish.. The sub box of course

Magnus001

I'm starting to build a box myself. What is that, that you used to cover the screw holes, if you don't mind?

andthereyouare

I would say that's wood putty. Or you can blend the saw dust from cutting all the MDF with some glue and that can be used as wood putty too.

Ramiro Tapia

can somebody tel me how to connect the wires of the Sony amp with RCA OUTPUT WIRES CONVERTER ? I HAVE MY FIRST F150 and I want upgrade my subwoofer.