2015 Behind the rear seat subwoofer box
#181
#182
#184
Official HTT Greeter
I went to the bracket that the Passenger rear seat latches to on the back wall. There should be a couple bolts in that area that should work.
It's the bracket on the left, you can barely see the Ground terminal and bolt at the bottom of the bracket.
It's the bracket on the left, you can barely see the Ground terminal and bolt at the bottom of the bracket.
Last edited by SixShooter14; 12-29-2016 at 10:18 AM.
#185
Dude do you have a chrome jack?? It looks like it in the pic! lol
#187
Senior Member
Crimony ... 19 pages and no measurements. There goes an hour I'll never get back. If it wasn't so cold out I'd have better spent my time measuring myself. OP should become a politician. Lots of promises...
The following users liked this post:
Toddman38 (01-19-2017)
#188
I'm gonna be finishing my box next week. I'll share my measurements, it's my 4th design (only wasted a sheet of mdf and 100+ hours on the first 3 ). It's .6 cuft. You can lift the bottom of seat up and lock it, but too close to run sub with seat up. With seat down there's 4 inches or so. I have a JL 10" TW3 that will go in there and it is TIGHT! But atleast you guys will have some measurements.
The following users liked this post:
k.b. (01-17-2017)
#189
One Clean Machine
iTrader: (5)
Member CougarCruiser had a shop build and Save the dimensions for others to use, in his Thread. Id reccommend contacting him, for the shop and dimensions of the box, as his fit a JL 10tw3. And the rear seat fully functioned using the sub.
He had the box and sub for sale recently, in the Classifieds here for 500.00...
He had the box and sub for sale recently, in the Classifieds here for 500.00...
#190
Didn't show all my math here but net volume came out to be like .35 and with the polyfill I heard it added 40% volume.. so .49 cu ft. .....sub recommended .5 cu ft ...good enough for me
this is with the bottom of the seat lifted, it touches the surround on the sub. gonna have to unplug the sub if seat bottoms need to be lifted for a trip
.5 lb of polyfill, used super77 to stick it in there good
First time carpeting, front looks good but back has alotta seams
Have the output from Sony Amp going into my sound processor, rca's from output of sound processor to input of Alpine amp, then output of Alpine amp going back to factory speaker wires.
The following users liked this post:
Especial86 (06-14-2021)