2015 Behind the rear seat subwoofer box
#121
Cool your jets Benny, we are just having a laugh. I've already stated I love the box.
The following users liked this post:
jbarron74 (12-14-2015)
#124
Senior Member
Thread Starter
#127
Senior Member
Get big peices to cover the back. Fit peices into the cutouts and overlap them with the other peices then cut through both peices to "double cut them" with glue applied.mpull the cut ones out and brush the seam. That is how they do carpet in your house. How often do you see seams in houses?
He obviously is proud of his box (and should be) but will not offer dimensions to "make it easy" for someone to replicate no matter how much anyone asks. he should just say he will not and stop all the questions.
With that said, it is not rocket science. Take the pics he posted, enlarge them and measure the same area in your truck ((if same year or model). There is your scale to figure height and width and all the cutouts.
He obviously is proud of his box (and should be) but will not offer dimensions to "make it easy" for someone to replicate no matter how much anyone asks. he should just say he will not and stop all the questions.
With that said, it is not rocket science. Take the pics he posted, enlarge them and measure the same area in your truck ((if same year or model). There is your scale to figure height and width and all the cutouts.
#128
Nice install. :thumbs: I have a 2012 F150 Supercrew. I have a Kenwood DNX891. JL 300/4 for the door speakers. Door speakers are front component C3 speakers. The rear door speakers are JL XR650. Both front and rear door speakers have crossovers. The sub amp is a JL500/1. The sub is a JL 10inch W7. Now for the hard part. The amps had to be installed under the rear seats as there isn't any space at all behind the seat for them. The sub box goes right behind the console between the bucket seats. It follows the curve of the console as it's really tight between the console and rear seat. Part of the sub box goes under the rear seat. Except for the Kenwood unit this stereo has been in my 97 Mazda extended cab and 06 Ranger extended cab. I used to have XR650 JL components in my other two trucks but the suspension on one cone developed a rip in the cone because it was so old and JL doesn't have any cones to replace it hence the C3 speakers in my 2012.
#129