2012 A-pillar Tweeter Wire Access
#61
Senior Member
Can someone help me pick the tweeters I should go with. I want factory location and would like to use factory harnesses. What I don't understand is I though the factory wiring had a crossover built in, so wouldn't I just need to hook speaker up and be done?
Wayne
Wayne
#62
Senior Member
I have the Kappas 6829cf and was thinking about doing the same. I also have the clarion xc1410 amp installed too which really woke these up. Any suggestions?
#63
Depending on the teeters you get, the factory high pass filters may or may not do the trick. I tried using them with JL tweets and one of the tweeters blew. I had to put in the JL crossovers, and now things work fine.
Last edited by mike d; 07-11-2014 at 11:05 AM.
The following users liked this post:
Koolponycar (07-11-2014)
The following users liked this post:
Koolponycar (07-11-2014)
#65
JBL
Has anyone installed the ?
If yes: how do you like the sound? Do you have pictures of what they look like installed?
If yes: how do you like the sound? Do you have pictures of what they look like installed?
#66
So far, my JBL 3/4" tweeters sound great off factory power and the stock inline crossover. They will be amped soon with the rest of the 3 way component set, but off the JBL crossover.
#68
Junior Member
You are absolutely The Man! Thank you!!
I just did the same tweeters the exact same way in my 2013!
I just did the same tweeters the exact same way in my 2013!
#69
Installed tweeters today. JL Audio C1 3/4”. I couldn’t find the factory crossover and as I’ve read it may be in the radio or somewhere not able to be seen. I added the JL crossover and it seems the speakers are quieter than expected. I also have an aftermarket amplifier on them. Has anybody just hooked tweeters up without their crossover and the “factory one” has been enough ? I’m scared to try and blow my tweeters.
#70
Originally Posted by Branny
Installed tweeters today. JL Audio C1 3/4”. I couldn’t find the factory crossover and as I’ve read it may be in the radio or somewhere not able to be seen. I added the JL crossover and it seems the speakers are quieter than expected. I also have an aftermarket amplifier on them. Has anybody just hooked tweeters up without their crossover and the “factory one” has been enough ? I’m scared to try and blow my tweeters.