2010 SCrew Box Build
Started building a subwoofer box for my brother's truck a couple weeks ago and am just about done - been working on it sporadically since I've been busy with school and work.
The box is for a pair of Infinity 860w 8" subs. It will be .95 ft^3 tuned to ~30hz which will yield an F3 of 29.5hz - should play plenty low with cabin gain. Dimensions - 6" H1 x 8.5" H2 x 12" D x 34" W Pieces cut http://img.photobucket.com/albums/v2...psf9f4aa4e.jpg Assembling http://img.photobucket.com/albums/v2...pse371665c.jpg Front baffle brace + vertical bracing http://img.photobucket.com/albums/v2...psdd8ff7b3.jpg Almost finished http://img.photobucket.com/albums/v2...ps517fb426.jpg All I have left to do is mount the subs and test for any leaks and then carpet it. |
That looks good. What are the angles of the cuts? With that information plus your dimensions and pictures, you have made life sooooo much easier for someone contemplating building a box.:thumbsup:
|
Make sure you put speaker grills on. I would hate to accidently kick a hole in one
|
I used a circular saw and I think it was 15 degrees for all angled cuts - couldn't find my protractor so I didn't measure them.
Got the box finished up... Carpeted http://img.photobucket.com/albums/v2...ps0dc51340.jpg http://img.photobucket.com/albums/v2...ps42c55d6d.jpg Port & Terminal cup http://img.photobucket.com/albums/v2...psc4e1de7a.jpg Grills on http://img.photobucket.com/albums/v2...psa30de01a.jpg Should get it installed next Friday in my bros truck. It'll be powered by a JL 500/1v2 and we'll be using the PAC OEM adapter. |
Looks good. It should kick!:thumbsup:
|
Any pictures with it installed in the truck? Also, does the seat fit all the way down and lock with it in place?
|
Originally Posted by NOLA FX4
(Post 3272893)
Any pictures with it installed in the truck? Also, does the seat fit all the way down and lock with it in place?
|
Great job, how do you get the carpet to look so good and seamless, always had trouble wrapping boxes.
|
Damn that looks nice..How much does that box weigh?
|
I appreciate the compliments! Sorry, no pics in the truck but it fits perfectly and sounds fantastic. More than enough output. My bro loves it!
I don't know how much it weighs, but it's really not very much since I used ply. MDF will be a bit heavier, but it still manageable for removal. Carpet takes some work to get the hang of and you pick up tricks over time. This is probably the 8 or 10th box I've built over the years that I've carpeted. Charcoal seems to be the most forgiving when it comes to seams compared to solid colors. A good sharp knife to trim where the edges all meet is necessary - I like to use the utility knives with the snap off blades. |
All times are GMT -4. The time now is 01:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands