1997 F150 Firewall
#1
Senior Member
Thread Starter
Join Date: Dec 2010
Location: Detroit
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
1997 F150 Firewall
I was trying to figure out were a hole in the firewall was so i could run my power wire through. Any ideas?
Also i have a standard cab, so i was wondering how i could mount the amp to the back of the cab. And how i could run the rca's and remote to the amp.
Also i have a standard cab, so i was wondering how i could mount the amp to the back of the cab. And how i could run the rca's and remote to the amp.
#2
Pickup Noob
Join Date: Sep 2010
Location: Bismarck ND
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
I couldn't find one on mine. So I drilled a hole just a little bigger than my power wire on the passengerside floorboard/wheel well. And then hid the wire under the plastic wheel gaurd. Ran all my wires under the carpet. Can take some pictures if you would like.
#3
Senior Member
Thread Starter
Join Date: Dec 2010
Location: Detroit
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
Thats the problem, i have the plastic floor.
#4
Senior Member
Join Date: May 2009
Location: webster ma
Posts: 1,399
Likes: 0
Received 0 Likes
on
0 Posts
right by the steering colum there should be a rubber plug i put a slit in it and ran all my wires thru there... if u look under the hood look about 4 inches to the left of the colum on the firewall
#5
Senior Member
Thread Starter
Join Date: Dec 2010
Location: Detroit
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
#7
Senior Member
Thread Starter
Join Date: Dec 2010
Location: Detroit
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
Senior Member
Thread Starter
Join Date: Dec 2010
Location: Detroit
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts