06 Standard Cab sub setup
Thread Starter
Member
Joined: Apr 2010
Posts: 60
Likes: 0
From: Ocala, FL
06 Standard Cab sub setup
Two memphis audio M3 12's behind seat in 2 separate sealed boxes, they're powered by a Power Acoustik 2000w monoblock amp.
I wired everything behind the back panel and down the sides of the truck and under the little plastic thing that looks like diamond plate. I wired the rca's on the drivers side and the power and remote on the passenger side. Then i wired the bass remote between the driver's seat and the middle seat.
The amp is halfway under the center console in the back and the boxes are held down by the seats, i know this probably isn't the best idea, but it works.
I wired everything behind the back panel and down the sides of the truck and under the little plastic thing that looks like diamond plate. I wired the rca's on the drivers side and the power and remote on the passenger side. Then i wired the bass remote between the driver's seat and the middle seat.
The amp is halfway under the center console in the back and the boxes are held down by the seats, i know this probably isn't the best idea, but it works.
