Will 326/65/18 fit on a standard ford rim
07-12-2012, 05:38 PM
#21
Senior Member
That's a real bummer those tires didn't even come close to fitting. What tires were they and I assumed your truck is a 4x4 leveled, right. If so a 305x65x18 is a good choice on a leveled 4x4 on the stock wheel's. This is a 34 inch tire and BFG makes them in an all terrain.
Last edited by PawPaw; 07-12-2012 at 05:50 PM.
07-12-2012, 06:14 PM
#22
Senior Member
Thread Starter
Originally Posted by PawPaw
That's a real bummer those tires didn't even come close to fitting. What tires were they and I assumed your truck is a 4x4 leveled, right. If so a 305x65x18 is a good choice on a leveled 4x4 on the stock wheel's. This is a 34 inch tire and BFG makes them in an all terrain.
Thanks for replying I will cross my fingers and hope these work!!
07-12-2012, 06:22 PM
#23
Senior Member
Originally Posted by Fastf3
Yes really a bummer!! Going for the 305's then my supplier just let me know that I can change them for something else but I would love BF's but he can't get them but will choose something else and next week I will have them. Yes 4x4 2" leveling kit I have!!
Thanks for replying I will cross my fingers and hope these work!!
07-12-2012, 06:25 PM
#24
Senior Member
Thread Starter
Originally Posted by speeddemon86
I had 305/60/18 Mickey Thompson mtz's and they were sweet!! Here's a couple old pics when I had stock wheels with those tires. I can't wait till these ****ty nittos wear out So I can go back to the mtz's!!
07-12-2012, 08:11 PM
#27
Senior Member
Thread Starter
What about procomp 35/12.50 18 tells me the rim range is 8 to 10 instead of the ones i got which told me 9 -12 for rim range am I looking at the same problems with the procomps or are they a bit skinnier The goodyears were 13 inches wide I just needed a inch And i probably would have made it!!!
07-12-2012, 08:14 PM
#28
Senior Member
Originally Posted by Fastf3
What about procomp 35/12.50 18 tells me the rim range is 8 to 10 instead of the ones i got which told me 9 -12 for rim range am I looking at the same problems with the procomps or are they a bit skinnier The goodyears were 13 inches wide I just needed a inch And i probably would have made it!!!
07-12-2012, 08:27 PM
#29
Senior Member
Thread Starter
Originally Posted by speeddemon86
My buddy runs 35x12.50 nitto mud graps but he had to run a 1.5 or 2" wheel spacer I believe
07-12-2012, 08:37 PM
#30
Senior Member
Originally Posted by Fastf3
Yeah though about that but not sure if they are safe enough though but I found and think I'm going for are the procomp 305/70/18 seems to be ok I can't choose much have to go with what my buddy can get for me