(1) What did you and your truck do today?
10-17-2015, 05:00 PM
Senior Member
Installed 20" LED bar in bumper space.
10-17-2015, 05:20 PM
10-17-2015, 05:47 PM
Senior Member
Everything is included to mount bar. It's stainless and I used loctight on all fasteners along with dielectric grease for connections.
Here is the harness I bought. This is a two lead but I got a one lead. It's all plug and play and includes jumpers to light switch if you don't want to tap truck lights. Mine only lights up when I turn it on but you can use jumpers to have the bottom wording lit when off.
The following users liked this post:
HardcoreOffroading (10-17-2015)
10-17-2015, 05:49 PM
Senior Member
Forgot to add bar!
This is what I used and will paint brackets black but unless you are looking for it they are hard to see.
The following users liked this post:
HardcoreOffroading (10-17-2015)
10-17-2015, 08:02 PM
Senior Member
Finished my patio.
10-17-2015, 09:19 PM
Thanks for all the links and feedback RES4CUE! I will definitely be looking at the sites you listed! Good to hear install was pretty easy. Truck looks sharp too 
10-17-2015, 09:37 PM
Senior Member
It was an easy two hour install with a trip to the hardware store in the middle! The hardest part was getting my old *** up under the dash to run the wire harness! Lol
10-18-2015, 04:41 AM
Senior Member
Frank
10-18-2015, 09:28 AM
Senior Member
I drive a forklift in a warehouse that supplies Ford with headlights and taillights. Some of those headlights come in big 40" x 48" cardboard boxes called ********. Yeah, you heard me. Anyway - each ******* has 4 pieces of 1/2" x 36" pine dowl. Great for kindling up at the trailer. So last week I took a 400lb plastic tote of them up. This week I scored a bunch of firewood on the side of the road in the ritzy part of town and took that up to the trailer last night. ...and a glamor shot for good measure.