Removing Rusted Bed Bolts
#1
Member
Thread Starter
Removing Rusted Bed Bolts
Hey guys, my first post.
I have to replace the rusted out bed on my newly acquired. It is a 1998, 6 1/2' bed, so 6 bolts. They are pretty much rusted in place. Broke 2 T-50 torx sockets after wetting them down with Aero Kroil lubricant.
I have done a couple of searches and have not come up with much. Got any suggestions?
I have to replace the rusted out bed on my newly acquired. It is a 1998, 6 1/2' bed, so 6 bolts. They are pretty much rusted in place. Broke 2 T-50 torx sockets after wetting them down with Aero Kroil lubricant.
I have done a couple of searches and have not come up with much. Got any suggestions?
#2
Senior Member
The acetylene BLUE wrench.
.
.
#4
Member
Thread Starter
Certainly thought of the cutting torch, unfortunately I don't have one. Tried the sawzall, but must have the wrong blades for what appears to be stainless steel.
Good to see I had the same thoughts. Next step either new blades or an angle grinder
Good to see I had the same thoughts. Next step either new blades or an angle grinder
#5
Member
Titanium drill bit.
.
.
The following users liked this post:
Half ton (06-17-2014)
Trending Topics
#10
Member