Hattp6

how is the radar holder? i heard that it doesnt stay tight that it goes loose after a few weeks or so...any probs with it at all bud?

Mike FX4

I made my own "invisicord" using the same type of terminals and cord. I'm just using the regular V1 mounting bracket off center behind/below the mirror. It tucks up and out of the way. I also pivoted the mirror post up as high as it would go to start with.

Mad Irishman

I have used a blendmount in my 2007 Mustang since I bought it in late 2006. I have never had to adjust or tighten the thing even once. It has been perfect. I liked it so much I put one in my F-150 about 6 months ago. Again perfect. I have never seen a mount as solid as this thing is if its properly installed. If you want the best mount on the planet... Get a Blendmount!

KidCobra97

I have had mine for just over 2 years and have never had to tighten it. Its Rock Solid

JDubUB

My biggest issue with my blend mount was it shook pretty good at times, and everything was tight. It would sometimes just kind of bounce. Doesn't mean all do. Sorry it's a crappy pic and it took me so long. Thought of it earlier this morning. This shows the gist of it. Up high, works like a charm, and hidden behind the limo tint.

Legendsk

I just used the standard mounting bracket that came with the detector. Pulled off the 2 suction cups, slathered some epoxy on it, positioned it where I wanted it, and duct-taped it in place. Next day, peel off the duct tape and it's not going anywhere.

In the past when I have had the windshield replaced, I just got them to save the bracket for me (with a little broken glass and epoxy stuck to it). Soak it in MEK overnight, flick the glass and epoxy off and it was ready to use again.