Brake lights, Turn signals and hazard lights do not work
05-20-2013, 12:40 PM
#1
Tunafish61
Thread Starter
Brake lights, Turn signals and hazard lights do not work
I spent half the day yesterday with a tech online trying to work the problem out. He said it was the turn signal switch on the column. After buying 2 new switches I'm still in the same position. I do not have Brake lights, Turn signals and no Hazard Lights. My truck is a 1996 Ford F-150 XLT. Can anyone help me. Thanks
05-20-2013, 02:30 PM
#2
Underground Rock Hound
Sorry for stating the obvious, but if everything else is working, it is a fuse, relay, or ground issue. There are usually secondary fuses and relays under the hood. Make sure you check them all.. easiest way I've found to check relays is to use a known good one.
05-21-2013, 08:47 AM
#4
This happened to me on a 93 ranger. I replaced all the bulbs, the multi-switch on the column and thought I had checked all the fuses, and replaced the trailer wiring. I gave up and dropped it off at a shop. They pulled the horn fuse out and stuck it where the tail light fuse was, worked instantly. I felt SO STUPIT! 
Double check all your fuses.
Double check all your fuses.
