Opinions on new wheel package
#11
Man, those Methods sure do look sharp. I assume they aren't a true beadlock, but does anybody that owns them know if the machine screws are removable (for the purpose of painting or something)?
#12
BoostKing Tuning
Yes the screws are removable. Mine are fake beadlock. I contact Method. They will sell you a new set of screws or you can get your own at a hardware store. I am thinking of taking mine out and doing them gloss black.
__________________
www.BoostKingTuning.com
2022 F150 Tremor - Current - BoostKing Custom Tuned 440whp on 93. --- 2022 Expedition Stealth H.O. - JB4 Only --- 2018 Mustang Hellion Sleeper - 907 whp on E85
2022 F150 Tremor - Current - BoostKing Custom Tuned 440whp on 93. --- 2022 Expedition Stealth H.O. - JB4 Only --- 2018 Mustang Hellion Sleeper - 907 whp on E85
#13
Thanks - awesome! Another option would be to talk to a local metal finishing shop and see about getting them plated a darker color or something. I may experiment with that when mine arrive.
#14
Senior Member
Thread Starter
The following users liked this post:
speeddemon0712 (03-29-2017)
#15
Senior Member
Current set up is 20x9 +20 fuel krank wheels wrapped in 35x12.50r20 nitto g2 terra grapplers A/t.
I hate the tires, should have went with a mud tire. So i will be changing that. Also not a big fan of the wheels, offset on them sucks, they have little to no lip and don't stick out. Also not a big fan of the huge center cap and the aluminum ****. When i got this setup done it was sight un seen and was to excited to ask about the details. So would like to go wider and more aggressive. I have a 6inch rough country lift and have already done cutting and trimming. I really like all black method nv, even though they dont have a lip if they had a nice low offset i would do it. If anyone has some ideas and pictures please post! Thanks guys, more the better. I will post a picture of my current setup.
I hate the tires, should have went with a mud tire. So i will be changing that. Also not a big fan of the wheels, offset on them sucks, they have little to no lip and don't stick out. Also not a big fan of the huge center cap and the aluminum ****. When i got this setup done it was sight un seen and was to excited to ask about the details. So would like to go wider and more aggressive. I have a 6inch rough country lift and have already done cutting and trimming. I really like all black method nv, even though they dont have a lip if they had a nice low offset i would do it. If anyone has some ideas and pictures please post! Thanks guys, more the better. I will post a picture of my current setup.
#16
Senior Member
Thanks! The good thing about this set up is wheels and tires are both cheaper. I can understand why the wheels would be, but the tires have more rubber so that makes no sense to me. Oh well, I ain't complaining! Haha.
#19
Senior Member
Thread Starter
They only make it in 20x9 0 offset for 6x135 bolt pattern so i guess i will have to go with that. Think it's 5 backspace. Leaning towards black. But what do you think about that offset. Will it be a big different from what i have now?