A couple years ago my headlight switch broke on my 2003 F150 XLT super cab. I ordered a new switch assembly from Amazon which came with fog light position which my truck did not have. Later while changing the oil I found connector wires for fog lights tucked up into the body above the bumper. My bumper and left side of the air dam were damaged in a small accident. I had found a new bumper on Amazon but did not have money at the time. Early this year I found a set of the bumper, air dam, fog lights on Amazon and ordered it. It has been siting in my garage since March waiting on the temperature to drop out of the 90's and higher. It finally cooled off and I started on the project. The front bumper is held on with 8 bolts, 4 to each mounting point. The kit was in 4 pieces and I had to take some parts off the old bumper. The top part of the kit is not the same as the original and is held on with plastic rivets

4 bolts to each pad to take bumper off

fog light

fog light hole in air dam

fog light sitting in place

lower shot of fog ligt in place

about half an inch from light to mount
which are not in good shape, I order some more. My main problem is there was no mounting kit for the fog lights and my original bumper assembly does not have fog lights so I do not know how they are mounted. Some photos of an original f150 fog light set up would be a great help, there is not a lot of space in the area for bolting it to the bumper