Rats. I have one sticker on the back lower right corner of my truck:

 

Love it !

 

Just bc someone doesn't like a mod, doesn't mean it's negative. It's just an opinion. You don't have to keep justifying your lights. Yours look better than most, but as a whole, I don't like them either. MOST of them look cheap. I've got fender flares on a truck that's lifted to high to use the bed, with big mud tires that almost never sees dirt. Think I care what anybody else thinks? Nope. Last time I checked the credit union sent me a bill for it every month, and nobody in here bothers to send me a donation, so they have no say in what I do. 👍🏽

 

^Amen to that

 

Disagree. I have this on my truck.

 

Mod your truck to look like a Titan!

 

They just could not move the fuel door forward a couple inches so, they did not have to cut into the fender flare ??

 

My biggest pet peeve is the SQWAT LIFE YO! 3" level on a 4x4 is almost as irritating to me because it makes the front higher than the rear.


2wd = 3"
4wd = 2.5"

 

It's not a pet peeve of mine re: the 3" front level/lift ... I just don't understand it, as it drastically affects your down-travel, and puts a ridiculous amount of stress on ball joints and connections at the front end. I know some of this can be alleviated via new UCA's with uniball joints, but still ... if you're gonna go 3", just go with a 4" lift and have it right in all respects.

And for the record, all of the above is why I did the 1.5" AS level up front. Actually it came out to be about 1.75" of level/lift. Even with that, I can tell that my down-travel is affected when I really flex things out, and it's also enough at 1.5" to make the little "bumps" on the LCA and knuckle miss each other on full lock - which lets the wheels turn further than they are supposed to go, and puts undue stress on the steering system.

 

You guys must be getting old...can't believe you hate this look!!