Heating/Cooling Not Working
#2
Senior Member
Need a little more info or actually need a few questions answered. Does the engine have normal operating temps? Do both heater hoses feel as hot as the top radiator hose? Finally do the inside controls work?
#3
Sorry, should have given more info. Everything inside works. Gauge is showing normal temp reading. Controls seem to be working. When you change heating cooling ****, nothing seems to change. Blowing one temp. Does not cool, does not heat up.
#4
Senior Member
Still working blind here, am assuming there is no AC on this vehicle, and the vehicle type doesn't really matter as I am not an expert. Do need to know if the controls are manual cable or vaccuum operated. Look under dash and see what is there. Push pull cables or rubber hoses. Look for something disconnected if cable, if its rubber hoses, look for where the vaccuum hose goes through the firewall. (About where the glove box is) look from engine side, sometimes break there.
#7
Checked the blend door, seems to be operating correctly when changing controls. Engine temps are normal. Changed out thermostat first. Air flow works correctly in the dash and in the defrost vents. Everything works correctly except I've only got a contant temperture. Will not adjust cooler or hotter.
Trending Topics
#9
Senior Member
I would have to agree with this just got done replacing the blend door motor on my truck I had no heat although I don't know if this would affect the cold I just noticed my heat wasn't working
#10
OVERTHINKER
Checked the blend door, seems to be operating correctly when changing controls. Engine temps are normal. Changed out thermostat first. Air flow works correctly in the dash and in the defrost vents. Everything works correctly except I've only got a contant temperture. Will not adjust cooler or hotter.